This software component is provided to you as part of a software package and
applicable license terms are in the Package_license file. If you received this
software component outside of a package or without applicable license terms,
the terms of the SLA0044 license shall apply and are fully reproduced below:
SLA0044 Rev5/February 2018
Software license agreement
ULTIMATE LIBERTY SOFTWARE LICENSE AGREEMENT
BY INSTALLING, COPYING, DOWNLOADING, ACCESSING OR OTHERWISE USING THIS SOFTWARE
OR ANY PART THEREOF (AND THE RELATED DOCUMENTATION) FROM STMICROELECTRONICS
INTERNATIONAL N.V, SWISS BRANCH AND/OR ITS AFFILIATED COMPANIES
(STMICROELECTRONICS), THE RECIPIENT, ON BEHALF OF HIMSELF OR HERSELF, OR ON
BEHALF OF ANY ENTITY BY WHICH SUCH RECIPIENT IS EMPLOYED AND/OR ENGAGED AGREES
TO BE BOUND BY THIS SOFTWARE LICENSE AGREEMENT.
Under STMicroelectronics� intellectual property rights, the redistribution,
reproduction and use in source and binary forms of the software or any part
thereof, with or without modification, are permitted provided that the following
conditions are met:
1. Redistribution of source code (modified or not) must retain any copyright
notice, this list of conditions and the disclaimer set forth below as items 10
and 11.
2. Redistributions in binary form, except as embedded into microcontroller or
microprocessor device manufactured by or for STMicroelectronics or a software
update for such device, must reproduce any copyright notice provided with the
binary code, this list of conditions, and the disclaimer set forth below as
items 10 and 11, in documentation and/or other materials provided with the
distribution.
3. Neither the name of STMicroelectronics nor the names of other contributors to
this software may be used to endorse or promote products derived from this
software or part thereof without specific written permission.
4. This software or any part thereof, including modifications and/or derivative
works of this software, must be used and execute solely and exclusively on or in
combination with a microcontroller or microprocessor device manufactured by or
for STMicroelectronics.
5. No use, reproduction or redistribution of this software partially or totally
may be done in any manner that would subject this software to any Open Source
Terms. �Open Source Terms� shall mean any open source license which requires as
part of distribution of software that the source code of such software is
distributed therewith or otherwise made available, or open source license that
substantially complies with the Open Source definition specified at
www.opensource.org and any other comparable open source license such as for
example GNU General Public License (GPL), Eclipse Public License (EPL), Apache
Software License, BSD license or MIT license.
6. STMicroelectronics has no obligation to provide any maintenance, support or
updates for the software.
7. The software is and will remain the exclusive property of STMicroelectronics
and its licensors. The recipient will not take any action that jeopardizes
STMicroelectronics and its licensors' proprietary rights or acquire any rights
in the software, except the limited rights specified hereunder.
8. The recipient shall comply with all applicable laws and regulations affecting
the use of the software or any part thereof including any applicable export
control law or regulation.
9. Redistribution and use of this software or any part thereof other than as
permitted under this license is void and will automatically terminate your
rights under this license.
10. THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS, WHICH ARE
DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT SHALL
STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
11. EXCEPT AS EXPRESSLY PERMITTED HEREUNDER, NO LICENSE OR OTHER RIGHTS, WHETHER
EXPRESS OR IMPLIED, ARE GRANTED UNDER ANY PATENT OR OTHER INTELLECTUAL PROPERTY
RIGHTS OF STMICROELECTRONICS OR ANY THIRD PARTY.
没有合适的资源?快使用搜索试试~ 我知道了~
【STM32】标准库-睡眠模式

共122个文件
h:55个
c:53个
dbgconf:4个


温馨提示
采用STM32F429IGT6单片机,KeilMDK5.32版本 使用SysTick系统滴答定时器进行延时 LED_R、LED_G、LED_B分别为PH10,PH11,PH12 Key1为PA0,Key2为PC13 KEIL5下载配置有FLASH与SRAM 在串口接收中断服务函数中,串口接收到数据则进入睡眠模式,外部中断触发则从睡眠模式下退出
资源详情
资源评论
资源推荐
收起资源包目录





































































































共 122 条
- 1
- 2























熠熠L
- 粉丝: 150
上传资源 快速赚钱
我的内容管理 展开
我的资源 快来上传第一个资源
我的收益
登录查看自己的收益我的积分 登录查看自己的积分
我的C币 登录后查看C币余额
我的收藏
我的下载
下载帮助


最新资源
- SCL-90的excel自动分析模板.xls
- (源码)基于OpenCV的混合图像生成系统.zip
- (源码)基于Flutter的游戏框架项目.zip
- (源码)基于C++的嵌入式应用调试跟踪系统.zip
- (源码)基于Python的图片拼接和空白处理项目.zip
- (源码)基于Qt和Pdfium的PDF文档处理工具.zip
- (源码)基于Arduino的智能家居控制系统.zip
- (源码)基于 Electron 和 React 的云 MarkDown 编辑器.zip
- (源码)基于ESP32的音频处理系统.zip
- (源码)基于 Chrome 插件开发模板的网页表格快速标注工具.zip
- (源码)基于Python的中文医学NLP评测基准与模型微调项目.zip
- (源码)基于STM32F103的简单数据采集系统.zip
- (源码)基于C语言的Nintendo DS SDK开发工具包.zip
- (源码)基于STM32F1微控制器的Sumo机器人.zip
- (源码)基于Arduino平台的桌面LED条形灯控制系统.zip
- (源码)基于Azure IoT Edge和OpenZWave的智能家居网关.zip
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈



安全验证
文档复制为VIP权益,开通VIP直接复制

评论10